24 V DRIVE, FTP-607 SERIES
HIGH SPEED THERMAL PRINTER
3-INCH TYPE MECHANISM
FTP-637MCL103
■ OVERVIEW
The FTP-607MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (80mm/s) for 2-inch and 3-
inch wide paper. Our original platen removal mechanism
allows easy paper loading and maintenance.
The FTP-607 MCL series can be used for a variety of
applications, such as POS/ECR, Kiosk terminals, ticket
issuing terminals, label printers, banking terminals, and
measurement and medical equipment.
■ HIGHLIGHTS
• Compact size
Height 15.5 mm, width 70.4 mm, depth 33.0 mm for the 2
inch model. The 3-inch product has a width of 92.4mm.
•
•
•
High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by
using Fujitsu's unique head drive control.
Easy loading mechanism (ELM) type
Our unique platen removal mechanism improved paper
loading and maintenance.
Multi-featuring diecast fame
By application of multi-featuring diecast frame, continous
print by function of heat-sink, high ESD stand by function
of earth frame and shock/vibration stand by function of
solid frame are valid.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
FTP-637MCL103
■ SPECIFICATIONS
Specification
Item
FTP-637MCL103
Conforms to RS232C / Centronics
Interface
24 VDC ±5%, 1.5 A average, 2.2 A peak
(print ratio: 25%)
For print head
Operating
Voltage
For motor
24 VDC ±5%, 1 A maximum
For logic
5 VDC ± 5%, 0.5 A maximum
92.4 x 33.0 x 15.5 mm (WxDxH)
70 x 60 x 24 mm (WxDxH)
Approximately 52g
Printer mechanism
Interface board
External
dimensions
Weight
Life
Pulse resistance: 5x 108 pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling
distance 50km (print ratio: 25% or less)
Head
Operating temperature
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C*1
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
Platen release detection Detected by slide switch
Recommended thermal sensitive paper FTP-030PU001(80mm)
*1: printing density assurance range, operation is possible at -0˚C to +40˚C
3
FTP-637MCL103
■ DIMENSIONS
1. Printer mechanism
FTP-637MCL103
center of paper
87.8
80.0
35(paper end sensor)
10.7
15.5
4.6
44.7
86.7
87.6±0.1
Unit: mm
2 Interface board
41.0
30
1
CN3
CN8
CN5
CN1
CN2
CN7
CN6
1
6
3
1
8
1
17.5
35.5
51.0
3.3
63.5
3.3
Unit: mm
70.0
4
FTP-637MCL103
■ CONNECTOR PIN ASSIGNMENT OF MECHANISM (FPC)
1. Thermal Head
Part number
:
52610-3090 Molex or equivalent
FTP-637MCL103 PIN ASSIGNMENT
Signal
PHK
I/O Contents
No
1
—
I
Photointerruptor (Cathode)
2
VSEN
PHE
SW
SW
VH
Ground power supply for paper sensor
Photointerruptor (Emittor)
Platen open switch
3
O
—
—
I
4
5
Platen open switch
6
7
VH
I
Power supply for thermal head
8
VH
I
9
DI
I
Print data in
10 STB3
11 STB4
12 VDD
13 GND
14 GND
15 GND
16 GND
17 GND
18 GND
19 TM
I
Print enable 3
Print enable 4
Power for logic
I
I
—
—
—
—
—
—
O
I
Ground power supply for thermal head
Thermistor
Print enable 1
Print enable 2
Print data latch
Clock
20 STB1
21 STB2
22 LAT
23 CLK
24 VH
I
I
I
I
I
I
I
I
I
25 VH
Power supply for thermal head
26 VH
27 MT/A
28 MT/A
29 MT/B
30 MT/B
Stepping motor excitation signal
5
FTP-637MCL103
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
6
|
Dynex TV Video Accessories DX WD1335 User Manual
Echo Hair Clippers HCA 260 User Manual
EDGE Tech Automobile Parts 20200 User Manual
Exmark Lawn Mower Lazer Z XP User Manual
Fiesta Gas Grill EZT40040 P413 User Manual
Fisher Price Cell Phone X14969 User Manual
Furuno SONAR CH270 User Manual
Garrett Metal Detectors Radar Detector GTAx 550 User Manual
GE Ice Maker GBS20KB User Manual
GE Refrigerator 197D3351P003 User Manual